The material of the diamond segment is diamond. What is the effect of the diamond concentration on the diamond segment?
In order to obtain a good cutting effect on the diamond tip, it is necessary to control the concentration of the diamond within a suitable range. The surface of the diamond segment has enough diamond to work with the cutting.
The first thing that needs to be guaranteed is the cutting efficiency of the diamond segment, and then the normal working life of the diamond segment is considered.
If the concentration of diamond added during the production of the diamond segment is too high, the proportion of the binder is too small, and the phenomenon of bridging is easy to form, which causes the diamond segment to fall off during use, and the resistance of the diamond segment is lowered. Abrasiveness; if the diamond concentration added during the production of the diamond segment is too low, the cutting edge is reduced, and the wear resistance of the diamond segment is also drastically reduced.
As the diamond concentration increases, the wear resistance of the diamond segment will gradually increase, and the service life will be gradually extended. However, the cost of each diamond segment will increase accordingly.
Therefore, when producing diamond segments, the concentration of diamond should be reasonably determined according to different cutting requirements, and it cannot be generalized.
If the diamond concentration is high or low, it will affect the diamond head, so the concentration of diamond should be controlled.
.jpg)
