Resin grinding wheel cleaning method:
In the production process, the diamond grinding wheel is used to polish the belt. Generally, the grinding wheel is removed for cleaning after 5-7 days of operation. (The above-mentioned rubber crumbs are polished and adhered to the surface of the corundum after high temperature friction, which is difficult to clean)
Now we soak it in acetone for 2 hours, then clean it with an imported cleaning agent. The effect is very good, but it is not environmentally friendly and does not save energy.
Resin wheel cleaning requirements:
1, to be environmentally friendly, does not contain ketones, can not be halogenated hydrocarbons.
2, can not damage the diamond wheel
Resin grinding wheel installation precautions
The grinding wheel must be carefully inspected and identified before installation. The steps to check the authentication are as follows:
1. Check if the grade of the grinding wheel is correct and whether it meets the performance, shape and size of all selected grinding wheels.
2. Check and identify the appearance of the grinding wheel. Use your eyes to see if the wheel is damaged (or has cracks). A grinding wheel with a damaged appearance (or a crack) cannot be used. In addition, there is a requirement that both ends of the grinding wheel be flat and there must be no obvious skew.
3. Inspect and identify the internal crack of the grinding wheel. With a hand-held grinding wheel, tap the grinding wheel with a wooden hammer to hear the sound. The cracked wheel gives a crisp sound, and the cracked grinding wheel is hoarse, which cannot be used.
.jpg)
.jpg)
